Aust Ultra Sealer U/C 4L

$56.95

Compare
SKU: 816-100-04 Category:

Description

Australis Ultra Sealer Undercoat is a 100% Acrylic formula specially designed for use on interior and exterior surfaces to
give long lasting performance. The product is easy to apply without messy spatter.

Features
Water based
100% acrylic
Excellent weather resistance
Recoat in 2 hours
Resists mould and fungal growth

Areas of Use
Designed for interior and exterior surfaces to give long lasting protection against Australia?s severe conditions. Suitable
for direct application to all types of masonry, galvanised iron, timber and cement surface.

Method of Application
May be applied by brush, roller, airless or conventional spray
Stir well before use by stirring with a broad flat paddle in a scooping motion
Do not apply if temperature is below 10C or likely to fall below 10C during drying
Do not apply if rain is expected or in hot, dry conditions

Coverage
Approximately 16 square metres per litre. This will vary depending on the application technique, the surface profile and
absorption qualities of the surface.

Thinning
Water ? Use up to 100ml per litre to aid application if necessary in hot dry conditions.

Drying (25C and 50% Relative Humidity)
Touch dry after 20 Minutes
Re-coatable after 2 Hours

Clean Up
Clean all equipment with water.

Sizes
1 Ltr, 2 Ltrs, 4 Ltrs, 10 Ltrs, 15 Ltr

Reviews

There are no reviews yet.

Be the first to review “Aust Ultra Sealer U/C 4L”

Your email address will not be published. Required fields are marked *